FDM

The manufacture of molten filaments or molten deposition modeling is a 3D printing process that uses a continuous filament of a thermoplastic material.

Detail 70%
Size 80%
Tolerances 80%

Polylactic acid or Polylactic. Biodegradable plastic due to its natural origin (corn, potato or sugarcane). The final texture is not as smooth as ABS, neither so resistant. However, printed pieces behave better with angles. They are brighter and do not need a warm bed.

PROPERTIES

  • Softening temperature (ASTM E2092) 80-90ºC
  • Melting temperature 175ºC
  • Impact resistence (ASTM D256): 118 J/m
  • Elongation at break (ASTM D638): 3.31 %
  • Tensile strength (ASTM D638): 50 MPa
  • Traction module (ASTM D638): 2315 MPa

Acrylonitrile Butadiene Stirene.It is one of the most used thermoplastics in 3D printing. Its main characteristics: Very tough, hard and rigid material, with chemical resistance to abrasion. It is soluble in acetone. It is not biodegradable, and suffers if it is exposed to UV rays.

PROPERTIES

  • Softening temperature: 105-200ºC
  • Melting temperature 200ºC
  • Izod Impact resistence (ASTM D256): 443 J/m
  • Break elongation (ASTM D638): 40 %
  • Tensile strength (ASTM D638): 42 MPa
  • Blending strength (ASTM D790): 68 MPa
  •  Flexural modulus (ASTM D790): 2255 MPa

The filament ABS FIREPROOF is a flame retardant tested to UL94 & IEC 60695-11-10, ideal for covering elements that may be a source of fire.

PROPERTIES

  • Softening temperature: 93ºC
  • Melting temperature: 200ºC
  • Izod Impact resistence (ASTM D256):  24 KJ/m2
  • Tensile strength (ASTM D638): 38 MPa

High quality material especially designed for medical applications. This filament is Class USP VI or ISO 10993-1 certificated, which makes this filament biocompatible with the human body.

PROPERTIES

  • Softening temperature (ISO 75): 98ºC
  • Melting temperature: 200ºC
  • Izod impact resistence (ISO 180): 15 KJ/m2
  • Charpy impact resistance (ISO 179): 124 KJ/m2
  • Tensile strength (ISO 527): 36.5 MPa
  • Traction module (ISO 527): 2550 MPa
  • Flexural strength (ISO 178): 75 MPa
  • Flexion module (ISO 178): 2600 MPa

It is a material that has the ability to be stretched at moderate elongations and, after suppressing the effort, return to its original form. It has the potential to be recyclable since they can be molded and reused as plastic.

PROPERTIES

  • Softening temperature (ASTM E2092): 105ºC
  • Melting temperature: 220ºC
  • Elongation at break (DIN 53504-S2): 600%
  • Tensile strength (DIN 53504-S2): 45 MPa
  • Shore surface hardness: 82A
  • Abrasion resistance: 23 mm3

It is a filament with exceptional weather resistance. Unlike many plastic materials, the ASA maintains its color and impact resistance, even after long-term outdoor use.

PROPIEDADES

  • Softening temperature (ASTM D648): 64ºC
  • Izod impact resistance (ASTM D256): 441 J/m
  • Break elongation (ASTM D638): 35%
  • Tensile strength (ASTM D638): 40 MPa
  • Traction module (ASTM D638): 1726 MPa
  • Flexural strength (ASTM D790): 62 MPa
  • Flexion module (ASTM D790): 1814 MPa
  • Surface hardness (ASTM D785): Rockwell 92

RESINS

A liquid photopolymer on a cuvette that hardens selectively layer by layer by polymerization activated by light. It is the perfect technology for prototyping with high precision and quality.

Detail 95%
Size 40%
Tolerances 100%

The Grey Pro Resin is ideal for versatile prototypes, maintaining good mechanical properties, but not forgetting precision and surface finish. It is worth mentioning the moderate elongation and the low deformation that it offers, thus being an ideal material for modeling, prototypes of injection molded products, masters of molds for plastics or silicones, templates and accessories for manufacturing.

PROPERTIES

  • Softening temperature: 42.7ºC / 58.4ºC (1.8MPa / 264 psi)
    49.7ºC / 73.1ºC (0.45MPa / 66 psi)
  • Izod impact resistance: 16 J/m / 25 J/m
  • Elongation at break (ASTM D 638-10): 12% / 6.2%
  • Tensile strength (ASTM D 638-10): 38 MPa / 65 MPa
  • Traction module (ASTM D 638-10): 1600 MPa / 2800 MPa
  • Flex module (ASTM C 790-10): 1200 MPa / 2200 MPa

The Flexible Resin is used for printing flexible parts with the need to be folded or compressed for the correct functioning of the model. It has a Shore hardness of 80A, which attributes a soft and pleasant touch to the pieces.

PROPERTIES

  • Elongation at break: 60% / 75- 5%
  • Tensile strength: 3.3 – 3.4 MPa  / 7.7 – 8.5 MPa
  • Surface hardness: Flexible: Shore 70–75 A  / 80–85 A

Designed to make precise details and smooth surfaces. It burns cleanly and without waste, which allows sectors such as jewelry to go directly from the digital design to a 3D printing suitable for direct reverse casting.

FDM

The manufacture of molten filaments or molten deposition modeling is a 3D printing process that uses a continuous filament of a thermoplastic material.

Polylactic acid or Polylactic. Biodegradable plastic due to its natural origin (corn, potato or sugarcane). The final texture is not as smooth as ABS, neither so resistant. However, printed pieces behave better with angles. They are brighter and do not need a warm bed.

PROPERTIES

  • Softening temperature (ASTM E2092) 80-90ºC
  • Melting temperature 175ºC
  • Impact resistence (ASTM D256): 118 J/m
  • Elongation at break (ASTM D638): 3.31 %
  • Tensile strength (ASTM D638): 50 MPa
  • Traction module (ASTM D638): 2315 MPa

Acrylonitrile Butadiene Stirene.It is one of the most used thermoplastics in 3D printing. Its main characteristics: Very tough, hard and rigid material, with chemical resistance to abrasion. It is soluble in acetone. It is not biodegradable, and suffers if it is exposed to UV rays.

PROPERTIES

  • Softening temperature: 105-200ºC
  • Melting temperature 200ºC
  • Izod Impact resistence (ASTM D256): 443 J/m
  • Break elongation (ASTM D638): 40 %
  • Tensile strength (ASTM D638): 42 MPa
  • Blending strength (ASTM D790): 68 MPa
  •  Flexural modulus (ASTM D790): 2255 MPa

The filament ABS FIREPROOF is a flame retardant tested to UL94 & IEC 60695-11-10, ideal for covering elements that may be a source of fire.

PROPERTIES

  • Softening temperature: 93ºC
  • Melting temperature: 200ºC
  • Izod Impact resistence (ASTM D256):  24 KJ/m2
  • Tensile strength (ASTM D638): 38 MPa

High quality material especially designed for medical applications. This filament is Class USP VI or ISO 10993-1 certificated, which makes this filament biocompatible with the human body.

PROPERTIES

  • Softening temperature (ISO 75): 98ºC
  • Melting temperature: 200ºC
  • Izod impact resistence (ISO 180): 15 KJ/m2
  • Charpy impact resistance (ISO 179): 124 KJ/m2
  • Tensile strength (ISO 527): 36.5 MPa
  • Traction module (ISO 527): 2550 MPa
  • Flexural strength (ISO 178): 75 MPa
  • Flexion module (ISO 178): 2600 MPa

It is a filament with exceptional weather resistance. Unlike many plastic materials, the ASA maintains its color and impact resistance, even after long-term outdoor use.

PROPIEDADES

  • Softening temperature (ASTM D648): 64ºC
  • Izod impact resistance (ASTM D256): 441 J/m
  • Break elongation (ASTM D638): 35%
  • Tensile strength (ASTM D638): 40 MPa
  • Traction module (ASTM D638): 1726 MPa
  • Flexural strength (ASTM D790): 62 MPa
  • Flexion module (ASTM D790): 1814 MPa
  • Surface hardness (ASTM D785): Rockwell 92

It is a material that has the ability to be stretched at moderate elongations and, after suppressing the effort, return to its original form. It has the potential to be recyclable since they can be molded and reused as plastic.

PROPERTIES

  • Softening temperature (ASTM E2092): 105ºC
  • Melting temperature: 220ºC
  • Elongation at break (DIN 53504-S2): 600%
  • Tensile strength (DIN 53504-S2): 45 MPa
  • Shore surface hardness: 82A
  • Abrasion resistance: 23 mm3

RESINS

DLP manufacturing. It consists of a liquid photopolymer in a cuvette that is selectively hardened layer by layer by light activated polymerization. It is the best technology for prototyping of high precision and quality. Used in the dental and jewelry sector.

The Grey Pro Resin is ideal for versatile prototypes, maintaining good mechanical properties, but not forgetting precision and surface finish. It is worth mentioning the moderate elongation and the low deformation that it offers, thus being an ideal material for modeling, prototypes of injection molded products, masters of molds for plastics or silicones, templates and accessories for manufacturing.

PROPERTIES

  • Softening temperature: 42.7ºC / 58.4ºC (1.8MPa / 264 psi)
    49.7ºC / 73.1ºC (0.45MPa / 66 psi)
  • Izod impact resistance: 16 J/m / 25 J/m
  • Elongation at break (ASTM D 638-10): 12% / 6.2%
  • Tensile strength (ASTM D 638-10): 38 MPa / 65 MPa
  • Traction module (ASTM D 638-10): 1600 MPa / 2800 MPa
  • Flex module (ASTM C 790-10): 1200 MPa / 2200 MPa

The Flexible Resin is used for printing flexible parts with the need to be folded or compressed for the correct functioning of the model. It has a Shore hardness of 80A, which attributes a soft and pleasant touch to the pieces.

PROPERTIES

  • Elongation at break: 60% / 75- 5%
  • Tensile strength: 3.3 – 3.4 MPa  / 7.7 – 8.5 MPa
  • Surface hardness: Flexible: Shore 70–75 A  / 80–85 A

Designed to make precise details and smooth surfaces. It burns cleanly and without waste, which allows sectors such as jewelry to go directly from the digital design to a 3D printing suitable for direct reverse casting.

TECHNOLOGIES


FDM (Fused Deposition Material)

Resins

Multijet

CNC Machining

FDM

Laser cut